The sanitary level gauge offers a 360-degree view of the process fluid for liquid level verification, and process validation. Unique end fittings with integral 90 degree elbows, reduces process dead space, increases tank visual verification area, and eliminates the leak paths associated with secondary fittings.
Wetted surfaces are Type 316L Stainless Steel with an internal finish of 20 Ra/180 grit, borosilicate glass inner sight tube and gaskets per your specifications. The gaskets chosen will determine the temperature and pressure ratings of the unit and can be as high as 150psig.
The sight tube is manufactured from heavy wall borosilicate glass tubing, then tooled to a precision sanitary end configuration, similar to .75″ stainless steel sanitary fittings. The inner wetted borosilicate glass sight tube is then protected with an impact resistant full polycarbonate shield, which is held in place with delrin shield guides.
Vessel connections vary with application, however .75″ sanitary tri-clamp ends are standard and center to center lengths are per your specification. Pressure ratings are up to 150 psig – full vacuum, temperature ratings are up to 350 F. Others specifications are available, please consult the factory.
Options for the sanitary level gauge include materials of constructions, SS, Alloys and plastic, connection configurations, lengths, shielding and gaskets.
This article comes from chem-flowtronics edit released