Wetted surfaces are Type 316L Stainless Steel with an internal finish of 20 Ra/180 grit, borosilicate glass inner level gauge and gaskets per your specifications. The gaskets chosen will determine the temperature and pressure ratings of the unit and can be as high as 150psig.
The level gauge is manufactured from heavy wall borosilicate glass tubing, then tooled to a precision sanitary end configuration, similar to .75″ stainless steel sanitary fittings. The inner wetted borosilicate glass level gauge is then protected with an impact resistant full polycarbonate shield, which is held in place with delrin shield guides.
Vessel connections vary with application, however .75″ sanitary tri-clamp ends are standard and center to center lengths are per your specification. Pressure ratings are up to 150 psig – full vacuum, temperature ratings are up to 350 F.
Options for the sanitary level gauge include materials of constructions, SS, Alloys and plastic, connection configurations, lengths, shielding and gaskets.
This article comes from chem edit released